Table of Contents
Advertisement
beginning of the operation parameter.
1.
Default value when this parameter is omitted:
None. (This parameter cannot be omitted if an operation is set.)
2.
Range of values:
None
cos
<COS>
Sets an index (CoS) indicating the priority on a Switch.
1.
Default value when this parameter is omitted:
The default CoS values are set. For details about the default Cos values, see
3.7.1 CoS values in the Configuration Guide Vol. 2.
2.
Range of values:
Set 0 to 7 (in decimal).
replace-user-priority
Sets the value for rewriting the user priority.
Replace the user priority of the received packet with <Priority>.
1.
Default value when this parameter is omitted:
None. (The user priority is not replaced.)
2.
Range of values:
Set 0 to 7 (in decimal).
<DSCP>
replace-dscp
Sets the value for rewriting DSCP.
The DSCP field of the received packet is replaced with the
1.
Default value when this parameter is omitted:
None. (The DSCP value is not replaced.)
2.
Range of values:
Set 0 to 63 (in decimal) or the DSCP name.
For details about the DSCP names that can be set, see Table 20-6 DSCP
names that can be specified.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<Priority>
qos (ip qos-flow-list)
<DSCP>
value.
343
Advertisement
Table of Contents
