Table of Contents
Advertisement
axrp vlan-mapping
Sets the VLAN mapping to be applied to a VLAN group and the VLANs participating in the
VLAN mapping.
Input format
To set information:
axrp vlan-mapping
To change information:
axrp vlan-mapping
list>
To delete information:
no axrp vlan-mapping
Input mode
(config)
Parameters
<Mapping ID>
Sets the VLAN mapping ID.
1.
2.
<VLAN ID list>
vlan
Sets the VLANs participating in the VLAN mapping. If you specify multiple VLANs,
you can specify a range.
1.
2.
vlan add
Sets the VLANs to be added to the VLAN list you have configured.
1.
2.
3.
<Mapping ID>
<Mapping ID>
| vlan remove
<VLAN ID
<Mapping ID>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 128
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Handling of
<VLAN ID list>
If the VLAN list is too long after the addition of VLANs, the VLAN list might be
divided into multiple lines and the configuration might be displayed as an
command that consists of multiple lines. If the VLAN list is
vlan-mapping
vlan
<VLAN ID list>
{vlan
<VLAN ID list>
list>}
<VLAN ID list>
and the specifiable values, see
<VLAN ID list>
and the specifiable values, see
after a change:
axrp vlan-mapping
| vlan add
<VLAN ID
axrp
215
Advertisement
Table of Contents
