Table of Contents
Advertisement
ethernet cfm cc alarm-priority
Sets the failure level to be detected by CC.
Failure levels equal to or higher than the parameter you set are detected.
Input format
To set or change information:
ethernet cfm cc level
To delete information:
no ethernet cfm cc level
Input mode
(config)
Parameters
level
<Level>
Sets the domain level that has been set by using the
command.
1.
2.
<No.>
ma
Sets the MA ID number set by using the
by using a character string or a VLAN ID by using the
parameter sets the MA ID number.
1.
2.
alarm-priority
Sets the lowest failure level that will be detected by CC.
1.
2.
<Level>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 7
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 65535
<Priority>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 5
The following table shows levels detected by CC and failure descriptions.
ma
<No.>
alarm-priority
<Level>
ma
<No.>
alarm-priority
ma
command. If the MA name has been set
ethernet cfm cc alarm-priority
<Priority>
ethernet cfm domain
ma name
command, the
595
Advertisement
Table of Contents
