Web-Authentication Redirect Enable - Alaxala AX1250S Software Manual

web-authentication redirect enable

The no web-authentication redirect enable
functionality.
Input format
To set information:
no web-authentication redirect enable
To delete information:
web-authentication redirect enable
Input mode
(config)
Parameters
None
Default behavior
The URL redirect functionality is enabled.
Impact on communication
After the no web-authentication redirect enable
redirect functionality does not operate.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the
system-auth-control
2. See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
Related commands
web-authentication system-auth-control
web-authentication port
authentication ip access-group
authentication arp-relay
command disables the URL redirect
command is set.
web-authentication redirect enable
command has been set, the URL
web-authentication
475