Table of Contents
Advertisement
instance
instance
Sets the VLANs that will participate in the MST instances of multiple spanning trees.
Input format
To set or change information:
instance
To delete information:
no instance
Input mode
(config-mst)
Parameters
<MSTI ID>
Sets an MST instance ID.
1.
2.
<VLAN ID list>
vlans
Sets the VLANs that will participate in MST instances. Either one VLAN ID or multiple
VLAN IDs can be set at one time. For a multiple specification, use a hyphen (
comma (
1.
2.
3.
Default behavior
All VLANs participate in MST instance ID0.
Impact on communication
When
mst
interrupts communication until the topology is formed.
148
<MSTI ID>
vlans
<MSTI ID>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 4095
,
) to indicate the selection.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Notes on using this parameter:
- All VLANs not participating in another MST instance participate in MST
instance ID0.
- To configure the same MST region, the MST instance ID and the VLAN ID set
by this parameter, as well as the values of the
revision
parameter, must match within the MST region.
is set for the
spanning-tree mode
<VLAN ID list>
<VLAN ID list>
and the specifiable values, see
name
command, recalculation of the topology
-
) or a
parameter and the
Advertisement
Table of Contents
