Table of Contents
Advertisement
system function
Notes
1.
When this command is entered, the message below appears. Save the configuration
and restart the Switch before entering another configuration command.
Please execute the reload command after save,
because this command becomes effective after reboot.
2.
If you enter this command, you cannot omit all of the parameters. At least one
parameter must be set.
3.
When this command is changed, if the functionality set after the change is the same
as before the change, processing by the same functionality continues.
4.
When you use this command to delete a functionality (including when the
functionality used before the change is not specified after the change), delete the
configuration of the applicable functionality first.
Related commands
mac access-group
ip access-group
mac qos-flow-group
ip qos-flow-group
ip igmp snooping (interface)
ipv6 mld snooping (interface)
ip dhcp snooping
authentication arp-relay
authentication ip access-group
dot1x port-control
web-authentication ip address
web-authentication port
mac-authentication port
50
Advertisement
Table of Contents
