Table of Contents
Advertisement
ethernet cfm enable (interface)
ethernet cfm enable (interface)
When
no ethernet cfm enable
applicable port or the applicable port channel stops.
Input format
To set information:
no ethernet cfm enable
To delete information:
ethernet cfm enable
Input mode
(config-if)
Parameters
None
Default behavior
CFM PDUs can be received.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
This command cannot be set for an Ethernet interface that is set for a channel group.
Also, an Ethernet interface set by using this command cannot be set for a channel
group. Set this command for the port channel interface to which the applicable
Ethernet interface belongs.
Related commands
None
608
is set, CFM PDU transmission processing on the
Advertisement
Table of Contents
