Table of Contents
Advertisement
snmp-server traps
snmp-server traps
Sets a trigger (timing) for issuing a trap.
Input format
To set or change information:
snmp-server traps [{ limited-coldstart-trap |
unlimited-coldstart-trap }] [link-trap-bind-info
standard} ] [agent-address
[web-authentication-trap {failure | all}] [mac-authentication-trap
{failure | all}]
To delete information:
no snmp-server traps
Input mode
(config)
Parameters
{limited-coldstart-trap | unlimited-coldstart-trap}
Limits the times when
overview of the events that cause the
be issued.
Table 32-3 Events causing coldStart Trap to be issued for each parameter
Parameter
limited-coldstart-trap
unlimited-coldstart-trap
1.
2.
link-trap-bind-info {private | standard}
Configures the MIB to be added when
The following table describes the MIBs to be added when
using this parameter is issued.
636
coldStart Trap
Default value when this parameter is omitted:
limited-coldstart-trap
Range of values:
limited-coldstart-trap
<Agent address>
] [dot1x-trap {failure | all}]
is issued. The following table provides an
coldStart Trap
Events
A Switch is started (the Switch is turned on).
A Switch is started (the Switch is turned on).
An IP configuration is added or deleted.
The time is changed by using the
or
unlimited-coldstart-trap
link up/down Trap
{private |
set by using this parameter to
set clock
command.
is issued.
link up/down Trap
set by
Advertisement
Table of Contents
