Media-Type - Alaxala AX1250S Software Manual

media-type

media-type
Selects the type of port to be used as a port on which
10BASE-T/100BASE-TX/1000BASE-T (RJ45) and 100BASE-FX/1000BASE-X (SFP) can
be switched.
Input format
To set or change information:
media-type {rj45 | sfp | auto}
To delete information:
no media-type
Input mode
(config-if)
Parameters
media-type {rj45 | sfp | auto}
Selects the type of port to be used as a port on which
10BASE-T/100BASE-TX/1000BASE-T (RJ45) and 100BASE-FX/1000BASE-X
(SFP) can be switched.
rj45
sfp
auto
1.
2.
Default behavior
auto (automatic selection) is set. The port operates as an sfp port when link-up occurs in
1000BASE-X.
Impact on communication
If the command is set for the line in use, the line goes down, but the line restarts on the
specified port.
When the change is applied
The change is applied immediately after setting values are changed.
86
An RJ45 port is used.
An SFP port is used.
A port is automatically selected.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
, , and
rj45 sfp auto