Table of Contents
Advertisement
qos (ip qos-flow-list)
2.
rst
Sets detection of packets whose RST flag in the TCP header is 1.
This parameter is an option available only when the protocol is TCP.
1.
2.
syn
Sets detection of packets whose SYN flag in the TCP header is 1.
This parameter is an option available only when the protocol is TCP.
1.
2.
urg
Sets detection of packets whose URG flag in the TCP header is 1.
This parameter is an option available only when the protocol is TCP.
1.
2.
<VLAN ID>
vlan
Sets the VLAN ID.
This parameter is effective only when it is applied to an Ethernet interface.
1.
2.
user-priority
Sets the user priority.
1.
2.
Operation parameters
action
To set or change an operation parameter, you must set the
342
Range of values:
None
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
None
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
None
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
None
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
See Specifiable values for parameters.
<Priority>
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
Set 0 to 7 (in decimal).
action
parameter at the
Advertisement
Table of Contents
