Table of Contents
Advertisement
Table 32-4 MIBs to be added when link up/down Trap is issued for each parameter
Parameter
MIBs to be added when link up/down Trap is issued
private
(Common to SNMPv1 and SNMPv2C traps) ifIndex, ifDescr, and
ifType
standard
(For SNMPv1 traps)
(For SNMPv2C traps) ifIndex, ifAdminStatus, and
1.
Default value when this parameter is omitted:
standard
2.
Range of values:
private
or
agent-address
<Agent address>
Sets the IPv4 address to be used for
SNMPv1 format. Because only the SNMPv1 frame format can have the
address>
field in their Trap-PDUs, the address set by using this command is applied
to SNMPv1 traps.
1.
Default value when this parameter is omitted:
If this parameter is not set, the IPv4 address whose
the smallest in the trap notification frame is used.
2.
Range of values:
Set an IPv4 address from
dot1x-trap {failure | all}
Sets the trap type for IEEE 802.1X authentication.
failure
Only traps for an authentication failure are issued.
all
Traps for both successful and failed authentication attempts are issued.
1.
Default value when this parameter is omitted:
failure
2.
Range of values:
or
failure
web-authentication-trap {failure | all}
Sets the trap type for Web authentication.
failure
Only traps for an authentication failure are issued.
all
Traps for both successful and failed authentication attempts are issued.
1.
Default value when this parameter is omitted:
failure
2.
Range of values:
ifIndex
standard
<Agent address>
0.0.0.0
all
in a trap notification frame in
<Agent address>
to
for
255.255.255.255
snmp-server traps
ifOperStatus
<Agent
value is
<Agent
address>.
637
Advertisement
Table of Contents
