Table of Contents
Advertisement
interface vlan
interface vlan
Sets a VLAN interface. Setting the VLAN interface allows you to set IP addresses for
VLANs.
Input format
To set or change information:
interface vlan
To delete information:
no interface vlan
Input mode
(config)
Parameters
<VLAN ID>
Sets the VLAN ID.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
None
Notes
1.
If a VLAN ID that has not been set yet is set for
the generated VLAN is a port VLAN. For a protocol VLAN or MAC VLAN, the VLAN
must be generated beforehand by using the
2.
If you set information for multiple VLAN interfaces, use the
command to set
3.
Setting
VLAN. Also, setting the
vlan
Related commands
vlan
120
<VLAN ID>
<VLAN ID>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See Specifiable values for parameters. Make sure that the default
ID = 1)
cannot be set when information is deleted.
<VLAN ID
list>.
no vlan
for a VLAN generated by the
no interface vlan
command deletes the VLAN.
<VLAN
ID>, a VLAN is generated and
vlan
command.
interface range
interface vlan
command deletes the
command for a VLAN generated by the
VLAN (VLAN
Advertisement
Table of Contents
