Aaa Accounting Dot1X - Alaxala AX1250S Software Manual

aaa accounting dot1x

Sends IEEE 802.1X accounting information to the accounting server.
Input format
To set information:
aaa accounting dot1x default start-stop group radius
To delete information:
no aaa accounting dot1x default
Input mode
(config)
Parameters
default
Sets the default accounting method of a Switch.
start-stop
If authentication is successful, the start accounting notification is sent to the
accounting server. If authentication is canceled, the stop accounting notification is
sent to the accounting server.
group radius
The RADIUS server is used as the accounting server.
Default behavior
A notification is not sent to the accounting server.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All IEEE 802.1X settings take effect when the
command is set.
2. See Table 22-1 Configuration commands and IEEE 802.1X authentication modes for
the authentication mode in which the command's settings are operable.
Related commands
aaa authentication dot1x
dot1x system-auth-control
radius-server host or dot1x radius-server host
aaa accounting dot1x
dot1x system-auth-control
371