Table of Contents
Advertisement
-
-
-
-
#1
Specify the same Ethernet port.
-
#2
When forced authentication is used as the Switch default, set only
group radius
#3
When forced authentication is used for the port-based authentication method,
set
5.
The forced authentication authorization state is canceled if authentication for the
applicable terminal is canceled.
6.
Before issuing private traps, you must use the
the destination IP address for traps and
7.
If either of the following commands has already been set, this command cannot be
set:
authentication force-authorized enable
authentication force-authorized vlan
Related commands
aaa authentication mac-authentication
mac-authentication port
mac-authentication system-auth-control
radius-server host
snmp-server host
mac-authentication static-vlan force-authorized
mac-authentication system-auth-control
aaa authentication mac-authentication
mac-authentication authentication
The following accounting log data is collected when an authentication
request is sent to the RADIUS server:
No=21:
NOTICE:LOGIN: (
<Additional information>
connection to RADIUS server.
<Additional
information>:
The accounting log data can be confirmed by using the
mac-authentication logging
.
aaa authentication mac-authentication
or
mac-authentication radius-server host
mac-authentication static-vlan force-authorized
#2
#3
) Login failed ; Failed to
MAC
,
PORT
,
VLAN
operation command.
<List
snmp-server host
mac-authentication
#1
show
default
name>.
command to set
.
543
Advertisement
Table of Contents
