Spanning-Tree Bpduguard - Alaxala AX1250S Software Manual

spanning-tree bpduguard

Sets the BPDU guard functionality for the applicable ports. This command is applied to the
applicable PVST+, single-spanning-tree, and multiple-spanning-tree ports, and operates on
ports on which the PortFast functionality has been set.
Input format
To set or change information:
spanning-tree bpduguard { enable | disable }
To delete information:
no spanning-tree bpduguard
Input mode
(config-if)
Parameters
{ enable | disable }
Setting
stops operation of the BPDU guard functionality.
1.
2.
Default behavior
The setting of the
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree portfast default
spanning-tree portfast
spanning-tree portfast bpduguard default
causes the BPDU guard functionality to take effect. Setting
enable
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
enable or disable
spanning-tree portfast bpduguard default
spanning-tree bpduguard
disable
command is used.
153