Table of Contents
Advertisement
web-authentication max-user
Sets the maximum number of users that can be authenticated on a Switch.
Input format
To set or change information:
web-authentication max-user
To delete information:
no web-authentication max-user
Input mode
(config)
Parameters
<Count>
Sets the maximum number of users that can be authenticated on a Switch on which
user authentication is performed.
1.
2.
Default behavior
The maximum number of users that can be authenticated on a Switch is 256.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All Web authentication settings take effect when the
system-auth-control
2.
See Table 23-1 Configuration commands and Web authentication modes for the
authentication mode in which the command's settings are operable.
3.
When this command is set, the setting is not applied to users that have already been
authenticated, and takes effect only from the next login.
4.
The maximum number of users that can be authenticated on a Switch and a port can
be set at the same time.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 256
command is set.
If the number of authenticated users reaches the maximum number for a port,
no more new users can be authenticated on that port.
If the number of authenticated users reaches the maximum number for a Switch,
<Count>
web-authentication
web-authentication max-user
463
Advertisement
Table of Contents
