spanning-tree single transmission-limit
Sets the maximum number of BPDUs that can be sent for the hello-time period of single
spanning trees.
Input format
To set or change information:
spanning-tree single transmission-limit
To delete information:
no spanning-tree single transmission-limit
Input mode
(config)
Parameters
<Counts>
Sets the maximum number of BPDUs that can be sent per hello-time.
This parameter is valid only when
single mode
command, the maximum number of BPDUs that can be sent per second is 3 (fixed)
and the setting value of this command is not referenced.
1.
2.
Default behavior
3 is set as the maximum number of BPDUs that can be sent.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree single mode
spanning-tree single hello-time
command. If
stp
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 10
spanning-tree single transmission-limit
<Counts>
rapid-stp
(802.1w) is set for the
(802.1D) is set for the
spanning-tree single mode
spanning-tree
193