Interface Fastethernet - Alaxala AX1250S Software Manual

interface fastethernet

Sets items related to 10BASE-T or 100BASE-TX lines. Entering this command switches to
config-if mode in which information about the relevant line can be set.
Input format
To set or change information:
interface fastethernet
Input mode
(config)
Parameters
<IF#>
Sets the interface port number.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
None
Notes
1. The port name is
Example: The name of the 0/1 port will be
2. This command cannot be deleted.
Related commands
None
<IF#>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See Specifiable values for parameters.
fastethernet + <Interface port number>.
fastethernet 0/1
interface fastethernet
.
81