Dns-Server - Alaxala AX1250S Software Manual

Configuration command reference
Hide thumbs Also See for AX1250S:
Table of Contents

Advertisement

dns-server

Sets the domain name server option that is distributed to clients. The domain name server
option is the IP address of a DNS server that a client can use.
Input format
To set or change information:
dns-server
To delete information:
no dns-server
Input mode
(dhcp-config)
Parameters
<IP address>
Sets the IP address of the DNS server that a client can use. Specify the address of
the server with the highest priority first.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
A maximum of two DNS server IP addresses can be specified for a pool.
Related commands
ip dhcp pool
<IP address>
[
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1.0.0.0 to 126.255.255.255, 128.0.0.0 to 223.255.255.255
The following address cannot be set:
127.0.0.0 to 127.255.255.255
-
<IP address>
]
dns-server
497

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1240s

Table of Contents