aaa authentication web-authentication
Default behavior
User authentication is performed by using the internal Web authentication database instead
of using the RADIUS server.
Impact on communication
When the device default setting is changed, authentication of terminals that had been
authenticated by the corresponding authentication functionality is canceled.
When settings for the authentication method list are changed, authentication of terminals on
ports specifying the corresponding authentication method list is canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All Web authentication settings take effect when the
system-auth-control
2.
See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3.
Enabling of this command requires a separate authentication setting for the RADIUS
server.
4.
The forced authentication functionality for Web authentication operates only when
RADIUS authentication is set. If multiple authentication methods are set, the forced
authentication functionality does not operate.
Related commands
aaa group server radius
radius-server host
web-authentication system-auth-control
web-authentication user-group
web-authentication authentication
436
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
command is set.
or
web-authentication radius-server host
web-authentication