Table of Contents
Advertisement
-
-
-
-
-
#1
Specify the same Ethernet port.
-
#2
When forced authentication is used as the Switch default, set only
group radius
#3
Set
authentication that uses the port-based authentication method.
5.
The authorized forced authentication state is canceled if the applicable user logs out.
6.
When private traps are issued, use the
destination IP address for traps and
7.
If either of the following commands has already been set, this command cannot be
set:
authentication force-authorized enable
authentication force-authorized vlan
Related commands
aaa authentication web-authentication
radius-server host
snmp-server host
web-authentication port
web-authentication system-auth-control
web-authentication port
web-authentication static-vlan force-authorized
web-authentication system-auth-control
aaa authentication web-authentication
web-authentication authentication
The following accounting log data is collected when an authentication
request is sent to the RADIUS server:
No=21:
NOTICE:LOGIN:
to connection to RADIUS server.
Additional information: MAC, USER, IP, PORT, VLAN
Check the account log with the show web-authentication
logging operation command.
.
aaa authentication web-authentication
or
web-authentication radius-server host
web-authentication static-vlan force-authorized
#1
#3
<Additional information>
<List name>
snmp-server host
web-authentication
#1
#2
Login failed ; Failed
default
for forced
command to set the
.
481
Advertisement
Table of Contents
