Table of Contents
Advertisement
mdix auto
Sets the MDI functionality of the port to be used.
Input format
To set information:
no mdix auto
To delete information:
mdix auto
Input mode
(config-if)
Parameters
None
Default behavior
During auto-negotiation, MDI and MDI-X are switched automatically.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
This command is enabled during auto-negotiation.
2.
If
media-type
3.
If
media-type
4.
If
media-type auto
Related commands
media-type
is
, this command is not valid.
sfp
is changed, the command settings return to the default state.
is set, this command cannot be set. Use the default value.
mdix auto
85
Advertisement
Table of Contents
