Table of Contents
Advertisement
radius-server retransmit
radius-server retransmit
Configures the default number of times an authentication request is re-sent to the general
RADIUS server used for authentication or to an authentication-specific RADIUS server.
Input format
To set or change information:
radius-server retransmit
To delete information:
no radius-server retransmit
Input mode
(config)
Parameters
<Retries>
Sets the number of times an authentication request is re-sent to the RADIUS server.
1.
2.
Default behavior
The default value for the number of times an authentication request is re-sent to the
RADIUS server is 3.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
The
host
radius-server host
34
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 15 (times)
retransmit
configurations of
,
mac-authentication radius-server host
have precedence over this configuration.
<Retries>
radius-server host
, and
,
dot1x radius-server
web-authentication
Advertisement
Table of Contents
