Table of Contents
Advertisement
mac-authentication static-vlan max-user (interface)
mac-authentication static-vlan max-user (interface)
Sets the maximum number of authentication terminals that can be authenticated on the
applicable port.
Input format
To set or change information:
mac-authentication static-vlan max-user
To delete information:
no mac-authentication
Input mode
(config-if)
Parameters
<Count>
Sets the maximum number of authentication terminals that can be authenticated on
the applicable port.
1.
2.
Default behavior
The maximum number of authentication terminals that can be authenticated on the port is
1024.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All MAC-based authentication settings take effect when the
system-auth-control
2.
See Configuration commands and MAC-based authentication modes for the
authentication mode in which the command's settings are operable.
3.
When this command is set, the setting is not applied to terminals that have already
been authenticated, and takes effect only from the next login.
4.
The maximum number of terminals that can be authenticated on a Switch and a port
can be set at the same time.
546
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 1024
command is set.
If the number of authenticated terminals reaches the maximum number allowed
for port-based authentication terminals, no more terminals can be
<Count>
static-vlan max-user
mac-authentication
Advertisement
Table of Contents
