Table of Contents
Advertisement
aaa group server radius
Configures a RADIUS server group. Entering this command switches to config-group mode
in which the RADIUS server group information can be set.
Input format
To set or change information:
aaa group server radius
To delete information:
no aaa group server radius
Input mode
(config)
Parameters
<Group name>
Configures the RADIUS server group name.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
If a valid RADIUS server is not set for the RADIUS server group, the server will not
operate.
2.
A maximum of four RAIDUS server groups can be set.
<Group name>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
We recommend that you use an upper-case letter for the first character.
<Group name>
aaa group server radius
21
Advertisement
Table of Contents
