Web-Authentication Logout Polling Interval - Alaxala AX1250S Software Manual

web-authentication logout polling interval

Specifies the polling interval of a monitoring frame that periodically monitors the connection
status of an authenticated terminal.
Input format
To set or change information:
web-authentication logout polling interval
To delete information:
no web-authentication logout polling interval
Input mode
(config)
Parameters
<Seconds>
Sets the polling interval of monitoring frames.


Default behavior
Monitoring frames are sent every 300 seconds to an authenticated terminal only if the
automatic logout command (the
used with periodic monitoring has been set.
Impact on communication
None
When the change is applied
The setting takes effect from the next polling interval.
Notes
1. All Web authentication settings take effect when the
system-auth-control
2. See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3. If the link for a monitored terminal goes down before periodic monitoring by the
functionality that monitors the connection of authenticated terminals arrives, the
Switch stops monitoring the terminal and logs it out due to its link-down state.
4. When the maximum connection time set by using the
max-timer
and logs it out.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
60 to 86400 (seconds)
web-authentication logout polling enable
command is set.
command expires, the Switch stops monitoring the applicable terminal
web-authentication logout polling interval
<Seconds>
command)
web-authentication
web-authentication
457