Table of Contents
Advertisement
spanning-tree single hello-time
spanning-tree single hello-time
Sets the interval for sending single-spanning-tree BPDUs.
Input format
To set or change information:
spanning-tree single hello-time
To delete information:
no spanning-tree single hello-time
Input mode
(config)
Parameters
<Hello time>
Specify the interval in seconds for sending BPDUs that are sent regularly from a
Switch.
1.
2.
3.
Default behavior
2 seconds is set as the interval for sending BPDUs.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None
186
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 10 (seconds)
Notes on using this parameter:
When 1 is set, the topology might be changed easily.
<Hello time>
Advertisement
Table of Contents
