36.1.22 Mac-Based Authentication Information - Alaxala AX1250S Software Manual

Index

36.1.22 MAC-based authentication information

Table 36-23 MAC-based authentication error messages
Message
interface : Invalid
mac-authentication port
configuration.
interface : Relations between
the mac-authentication
configuration and the vlan mode
configuration are inconsistent.
interface : Relations between
the
mac-authentication
configuration and the
mirror configuration are
inconsistent.
interface : Relations between
the mac-authentication
configuration and the
channel-group configuration
within same port.
interface : Cannot set the
command because the specified
vlan is not found.
<VLAN ID>
interface : Relations between
individual force-authorized and
common force-authorized are
inconsistent.
interface : Relations between
user-group or legacy mode
configuration(s) and
authentication list
configuration(s) are
inconsistent.
mac-auth : Cannot set the
command because the specified
vlan is not found.
<VLAN ID>
684
Explanation
Deletion is not possible because
access-group authentication arp-relay
or
applicable port.
MAC-based authentication cannot be set because the specified port
has been set as a protocol port.
MAC-based authentication cannot be set because the specified port
has been set as a mirror port.
The specified port cannot join the port channel because the port is
being used by the MAC-based authentication configuration.
The specified VLAN cannot be set because it is not a MAC VLAN.
<VLAN ID>: VLAN ID
The following commands cannot be set for the specified port
because force authentication common across the types of
authentication functionality is set:
mac-authentication force-authorized vlan
mac-authentication static-vlan force-authorized
Delete the following:
authentication force-authorized enable
authentication force-authorized vlan
mac-authentication authentication
The
be set because the authentication method for each user ID or legacy
mode has been set.
Delete the following:
dot1x vlan dynamic enable
dot1x vlan dynamic radius-vlan
web-authentication user-group
web-authentication vlan
mac-authentication interface
mac-authentication vlan
The specified VLAN cannot be set because it is not a MAC VLAN.
<VLAN ID>: VLAN ID
authentication ip
is set for the
command cannot