spanning-tree bpdufilter
spanning-tree bpdufilter
Sets the BPDU filter functionality for the applicable ports. This command is applied to the
applicable PVST+, single-spanning-tree, and multiple-spanning-tree ports.
Input format
To set information:
spanning-tree bpdufilter enable
To delete information:
no spanning-tree bpdufilter
Input mode
(config-if)
Parameters
None
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When this command is set, the BPDU guard functionality is not valid.
Related commands
None
152