State - Alaxala AX1250S Software Manual

state

Sets the VLAN status.
Input format
To set or change information:
state {suspend | active}
To delete information:
no state
Input mode
(config-vlan)
Parameters
{suspend | active}
suspend
active
1.
2.
Default behavior
The VLAN status is
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
When Set
SNMP manager, the setting is applied to this command.
Related commands
None
Sets disable as the VLAN status and stops the sending and receiving of all
frames.
Sets enable as the VLAN status and starts the sending and receiving of all
frames.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
suspend or active
enable .
of ifAdminStatus is executed by the SetRequest operation of SNMP from the
state
127