Table of Contents
Advertisement
Message
vlan[<VLAN
ID>] : Can't set
access-vlan which is not
configured to use vlan.
vlan[<VLAN
ID>] : Can't set
mac-address-table which is not
configured to use vlan.
vlan[<VLAN ID
>] : Can't set
native-vlan which is not
configured to use vlan.
vlan[<VLAN ID
>] : Data can't be
set because of not mac-based.
vlan[<VLAN ID
>] : Data can't be
set because of not
protocol-based.
vlan[<VLAN ID
>] : mac-address
has already been set to other
VLAN[<VLAN ID
>].
vlan[<VLAN ID
>] : maximum
number which can be used is
exceeded.
vlan[<VLAN ID
>] : Protocol
{ethertype|llc|snap-ethertype}
duplicate at
ChGr[<Channel
<HEX>
group#>].
vlan[<VLAN ID
>] : Protocol
{ethertype|llc|snap-ethertype}
duplicate at port[<IF#>].
<HEX>
vlan-protocol : Cannot delete
protocol referred by VLAN
configuration.
vlan-protocol : maximum number
which can be used is exceeded.
Explanation
The access VLAN cannot be set because the VLAN does not exist.
<VLAN
ID>: VLAN ID
mac-address-table
cannot be set because the VLAN does not
exist.
<VLAN
ID>: VLAN ID
The native VLAN cannot be set because the VLAN does not exist.
<VLAN
ID>: VLAN ID
mac-address
cannot be registered because the specified VLAN is
not a MAC VLAN.
<VLAN
ID>: VLAN ID
protocol
cannot be registered because the specified VLAN is not
a protocol VLAN.
<V VLAN ID
>: VLAN ID
mac-address
The
that has been specified cannot be registered
because it has already been registered for another VLAN.
< VLAN ID
>: VLAN ID
No more entries can be generated because the number of VLANs
exceeds the maximum number of entries.
No more VLANs can be registered because the number of
mac-address
registered
entries.
No more entries can be registered because the number of registered
mac-address-table
items exceeds the maximum number of
entries.
<VLAN
ID>: VLAN ID
Only one VLAN to be specified by the same protocol value can be
set on the same port channel.
< VLAN ID
>: VLAN ID
<HEX>: Protocol value
<Channel
group#>: Channel group number
Only one VLAN to be specified by the same protocol value can be
set on the same port.
< VLAN ID
>: VLAN ID
<HEX>: Protocol value
<IF#>: Ethernet port number
The protocol cannot be deleted because
A maximum of 16 protocol values
snap-ethertype
and
value) are used in the entire system. No
more than 16 values can be set.
items exceeds the maximum number of
protocol
(ethertype
value,
Index
uses it.
llc
value,
665
Advertisement
Table of Contents
