Ip Route - Alaxala AX1250S Software Manual

ip route

Sets a static route IPv4 address.
Input format
To set or change information:
ip route
To delete information:
no ip route
Input mode
(config)
Parameters
<IP address>
Sets the destination IPv4 address for a static route.
1.
2.
<Mask>
Sets the network mask for the destination IPv4 address for the static route.
1.
2.
<Next hop>
Sets the next hop address on the static route.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<IP address> <Mask> <Next hop>
<IP address> <<Mask> <Next hop>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0.0.0.0 to 255.255.255.255
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Subnet mask: 0.0.0.0 to 255.255.255.255 (bits must be contiguous)
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1.0.0.0 to 126.255.255.255, 128.0.0.0 to 223.255.255.255
ip route
265