Table of Contents
Advertisement
RADIUS server is disabled.
7.
If multiple IEEE 802.1X authentication RADIUS servers are configured, the address
displayed first by using the
of the primary general RADIUS server. The primary IEEE 802.1X authentication
RADIUS server is used as the initial current server (the destination for RADIUS
authentication requests during operation).
If a failure occurs on the primary IEEE 802.1X authentication RADIUS server, the
current server switches to the next effective IEEE 802.1X authentication RADIUS
server (the secondary RADIUS server). For details about automatic restoration of the
primary IEEE 802.1X authentication RADIUS server, see the description of the
radius-server dead-interval
8.
If a RADIUS server with an IP address that matches has already been registered in
the general RADIUS server configuration, the authentication-specific RADIUS server
configuration, or the RADIUS server group configuration, all these parameters are
replaced by the new commands that were entered automatically.
Related commands
aaa authentication dot1x
dot1x port-control
dot1x system-auth-control
show radius-server
operation command is the address
command.
dot1x radius-server host
dot1x
395
Advertisement
Table of Contents
