36.1.8 Mac Address Table Information - Alaxala AX1250S Software Manual

Configuration command reference
Hide thumbs Also See for AX1250S:
Table of Contents

Advertisement

Index
Message
Mirror port and port-channel are
inconsistent.
Relations between ip source
binding configuration and
channel-group configuration are
inconsistent.
Relations between vlan in
mac-address-table static
configuration and channel-group
configuration are inconsistent.
this command is different from
this one in channel-group port.

36.1.8 MAC address table information

Table 36-8 MAC address table error messages
Message
Can't set mac-address-table
because of port-channel
nothing.
Relations between vlan in
mac-address-table static
configuration and switchport
configuration are inconsistent.
662
Explanation
The port cannot join the port channel because the port is being used
as a mirror port.
The specified port cannot join the port channel because the port is
ip source binding
being used by the
ip source binding
Delete the
The specified port cannot be deleted because it is being used by the
ip source binding
configuration.
ip source binding
Delete the
The interface cannot join the port channel because the interface is
mac-address-table static
being used by the
Different settings were found on ports specified for the same
channel group.
The configuration of the ports specified for the same channel group
must either match or be deleted.
Explanation
mac-address-table
cannot be set because there is no port
channel.
mac-address-table static
The
switchport
configuration do not match. A VLAN set by using
mac-address-table static
access/switchport trunk allowed vlan/switchport mac
vlan/switchport protocol vlan
set.
configuration.
setting, and then set it again.
setting, and then set it again.
configuration.
VLAN specification and the
switchport
must be set by
of the interface that has been

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1240s

Table of Contents