Table of Contents
Advertisement
dot1x auto-logout
The
no dot1x auto-logout
authentication when no frame is received from a terminal authenticated by IEEE 802.1X for
a certain period of time.
Input format
To set information:
no dot1x auto-logout
To delete information:
dot1x auto-logout
Input mode
(config)
Parameters
None
Default behavior
Authentication is automatically canceled if no frames are received from a terminal
authenticated by IEEE 802.1X for a certain period of time.
Impact on communication
After the
no dot1x auto-logout
canceled if no frames are received from a terminal authenticated by IEEE 802.1X for a
certain period of time.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All IEEE 802.1X settings take effect when the
command is set.
2.
See Table 22-1 Configuration commands and IEEE 802.1X authentication modes for
the authentication mode in which the command's settings are operable.
Related commands
dot1x port-control
dot1x system-auth-control
mac-address-table aging-time
command disables the setting to automatically cancel
command is set, authentication is not automatically
dot1x system-auth-control
dot1x auto-logout
377
Advertisement
Table of Contents
