power-control port cool-standby
Enables power saving for Fast Ethernet ports and gigabit Ethernet ports in the link-down
status.
Input format
To set information:
power-control port cool-standby
To delete information:
no power-control port cool-standby
Input mode
(config)
Parameters
None
Default behavior
Operation is at normal power consumption.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
If this command is set, link-up of the Fast Ethernet port takes about 3 seconds.
2.
During scheduled operation of the power saving functionality, the Switch operates
according to the configuration of the
command.
Related commands
None
schedule-power-control port cool-standby
power-control port cool-standby
55