Table of Contents
Advertisement
axrp vlan-mapping
vlan remove
Sets the VLANs to be removed from the VLAN list you have configured.
1.
2.
3.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
You cannot specify multiple VLAN mappings for one VLAN.
2.
You cannot specify a VLAN mapping for the VLAN used as the control VLAN.
Related commands
vlan
216
shorter after the addition of VLANs, an
consisted of multiple lines might be consolidated and displayed as the
configuration.
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Handling of
<VLAN ID list>
If the VLAN list is too long after the addition of VLANs, the VLAN list might be
divided into multiple lines and the configuration might be displayed as an
command that consisted of multiple lines. If the VLAN list is
vlan-mapping
shorter after the removal of VLANs, an
consisted of multiple lines might be consolidated and displayed as the
configuration.
axrp vlan-mapping
<VLAN ID list>
and the specifiable values, see
after a change:
axrp vlan-mapping
command that
axrp
command that
Advertisement
Table of Contents
