Table of Contents
Advertisement
rmon event
1.
2.
owner
<Owner string>
Sets the identification information of the person who specified this setting. This
information is used to identify the person who specified this setting. This parameter is
equivalent to
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When an event group is accessed from the SNMP manager and traps are sent to the
SNMP manager, you must register the SNMP manager by using the
community
2.
To send a trap to the SNMP manager, set the IP address of the SNMP manager and
rmon
3.
A trap is sent only if the community name used when the SNMP manager is
registered matches the community name of the event group.
4.
The information identification number is set as the value for
falling-event-index
executed when an alarm is generated.
Related commands
snmp-server host
rmon alarm
626
Default value when this parameter is omitted:
Blank
Range of values:
Specify a character string that is no more than 79 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
eventOwner
defined in RFC 1757.
Default value when this parameter is omitted:
Blank
Range of values:
Specify a character string that is no more than 24 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
and
snmp-server host
by using the
snmp-server host
of an event group. If the values are different, no event is
commands.
command.
snmp-server
rising-event-index
or
Advertisement
Table of Contents
