Table of Contents
Advertisement
channel-group max-active-port
Notes
1.
Use this command in static link aggregation mode.
2.
If you set the
max-active-port
3.
To change link-down or no-link-down for the standby link mode, first delete the
parameter, and then set it again. To change the number of ports in link-not-down
mode, you must set the
Related commands
interface port-channel
channel-group lacp system-priority
lacp system-priority
lacp port-priority
104
command, match its settings to the settings of the
max-active-port
and
lacp port-priority
no-link-down
commands on the destination device.
command.
Advertisement
Table of Contents
