Table of Contents
Advertisement
qos (mac qos-flow-list)
Sets flow detection conditions and operation settings in the MAC QoS flow list.
Input format
To set or change information:
[
<Seq>
To delete information:
no
Input mode
(config-mac-qos)
Parameters
<Seq>
Specify a sequence number in the QoS flow list to be created or changed.
1.
2.
{
<Src MAC> <Src MAC mask>
Sets the source MAC address. To set all source MAC addresses, set
1.
2.
] qos {
<Flow detection conditions>
<Flow detection conditions>
{<Src MAC> <Src MAC mask>
MAC mask>
| host
| pvst-plus-bpdu }[
<Priority>
]
<Operation settings>
action [cos
<COS>
<Seq>
Default value when this parameter is omitted:
10 is set as the initial value if there are no conditions in the QoS flow list.
If conditions have been set, the initial value is the maximum value for the
application sequence that has been set plus 10.
Note, however, that if the maximum value for the application sequence is
greater than 4294967285, the value cannot be omitted.
Range of values:
Set 1 to 4294967295 (in decimal).
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify
<Src
MAC>,
<Src MAC> <Src MAC mask>
-
Specify the source MAC address for
For
<Src MAC
bits that permit an arbitrary value in the MAC address.
-
host
<Src MAC>
} [
<Operation settings>
| host
<Src MAC>
<Dst MAC>
| any | bpdu | cdp | lacp | lldp | oadp
<Ethernet type>
] [vlan
] [replace-user-priority
| host
<Src MAC>
| any}
<Src MAC
mask>,
host
specification:
mask>, specify a mask in MAC address format that sets
specification:
qos (mac qos-flow-list)
]
| any}{
<Dst MAC> <Dst
<VLAN ID>
] [user-priority
<Priority>
]
any
<Src
MAC>, or
any
.
<Src
MAC>.
.
345
Advertisement
Table of Contents
