Table of Contents
Advertisement
{ip |
<Protocol>
| icmp | igmp | tcp | udp}
Sets the upper-layer protocol condition of IPv4 packets.
Note that if all protocols are applicable,
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2.
Range of values:
-
<Protocol>:
Set 0 to 255 (in decimal) or a protocol name.
See Table 20-1 Protocol names that can be specified (IPv4).
{
<Src IPv4> <Src IPv4 wildcard>
Sets the source IPv4 address.
To set all source IPv4 addresses, set
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2.
Range of values:
Specify
<Src
-
<Src IPv4> <Src IPv4 wildcard>
Specify the source IPv4 address for
For
<Src IPv4
bits that permit an arbitrary value in an IPv4 address.
-
host
The flow detection condition is a perfect match of
any
-
The source IPv4 address is not included as a filter condition.
IPv4 address (nnn.nnn.nnn.nnn): 0.0.0.0 to 255.255.255.255
eq
<Src port>
Sets the source port number.
This parameter is an option available only when the protocol is TCP and UDP.
1.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2.
Range of values:
Set 0 to 65535 (in decimal) or a port name.
For details about the port names that can be set, see Table 20-2 Port names
that can be specified for TCP and Table 20-3 Port names that can be specified
for UDP (IPv4).
{
<Dst IPv4> <Dst IPv4 wildcard>
Sets the IPv4 address of an interface.
To set all destination IPv4 addresses, set
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
ip
| host
<Src IPv4>
any
IPv4>,
<Src IPv4
wildcard>,
wildcard>, specify a wildcard in IPv4 address format that sets
<Src IPv4>
specification:
specification:
| host
<Dst IPv4>
is set.
| any}
.
<Src
IPv4>, or
host
specification:
<Src
IPv4>.
<Src
IPv4>.
| any}
.
any
qos (ip qos-flow-list)
.
any
339
Advertisement
Table of Contents
