Alaxala AX1250S Software Manual page 704

Configuration command reference
Hide thumbs Also See for AX1250S:
Table of Contents

Advertisement

Index
Message
dot1x(vlan dynamic): Cannot set
"dot1x vlan dynamic enable"
because authentication
multi-step is set.
dot1x(vlan dynamic): Cannot set
"dot1x vlan dynamic
radius-vlan" because
authentication list or
user-group is set.
dot1x(vlan dynamic): Cannot set
"dot1x vlan dynamic
radius-vlan" because the
authentication multi-step is
set.
dot1x: Cannot set "dot1x
system-auth-control" because
l2protocol-tunnel eap
configuration is valid now.
l2protocol-tunnel: Cannot set
"l2protocol-tunnel eap" because
802.1X configuration is valid
now.
radius-server: Cannot add new
radius-server host because the
maximum number is already set.
radius-server: Port Number is
duplicate between auth port and
acct port.
system function isn't set.
xxxxx: Cannot set the command
because of internal error.
(code=y)
680
Explanation
dot1x vlan dynamic enable
The
because multistep authentication is set.
Delete the settings of the
command.
dot1x vlan dynamic radius-vlan
The
set because the authentication method for each user ID or the
port-based authentication method is set.
Delete the following:
dot1x authentication
mac-authentication authentication
web-authentication authentication
web-authentication user-group
dot1x vlan dynamic radius-vlan
The
set because multistep authentication is set.
Delete the settings of the
command.
IEEE 802.1X cannot be set because the EAPOL forwarding
functionality is enabled.
The EAPOL forwarding functionality cannot be set because IEEE
802.1X is enabled.
No more entries can be registered because maximum number of
entries are registered.
auth-port
The port numbers for
The following commands cannot be set because the
function
command is not set:
dot1x port-control auto
authentication arp-relay
authentication ip access-group
The command could not be set because an internal error has
occurred.
dot1x
radius-server
xxxxx
:
/
multi-step
,; y : 1, 2, 3, 4
command cannot be set
authentication multi-step
command cannot be
command cannot be
authentication multi-step
acct-port
and
l2protocol-tunnel
/
are the same.
system
/

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1240s

Table of Contents