Table of Contents
Advertisement
aaa authentication dot1x
aaa authentication dot1x
Sets an IEEE 802.1X authentication method group.
If
default
maximum of four entries can be set.
Input format
To set or change information:
aaa authentication dot1x default
aaa authentication dot1x
To delete information:
no aaa authentication dot1x {default |
Input mode
(config)
Parameters
default
Sets the default authentication method of a Switch. For <Method>, specify
radius
group radius
<List name>
Sets the name of an authentication method list.
1.
2.
group
<Group name>
IEEE 802.1X authentication is performed by a RADIUS server. The RADIUS server to
use is a RADIUS server group. Specify the RADIUS server group name set by the
aaa group server radius
1.
2.
372
is set, one entry can be set. If an authentication method list name is specified, a
<Method>
.
IEEE 802.1X authentication is performed by a RADIUS server. The RADIUS
server that can be used is an IEEE 802.1X RADIUS server or a general
RADIUS server.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters
(with the exception of the at mark (
We recommend that you use an upper-case letter for the first character.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
<Method>
<List name>
group
<List name>
@
)).
command.
<Group name>
}
group
Advertisement
Table of Contents
