Table of Contents
Advertisement
qos
The QoS functionality is used.
1.
Default value when this parameter is omitted:
The QoS functionality cannot be used.
2.
Range of values:
None
igmp-snooping
The IGMP snooping functionality is used.
1.
Default value when this parameter is omitted:
The IGMP snooping functionality cannot be used.
2.
Range of values:
None
mld-snooping
The MLD snooping functionality is used.
1.
Default value when this parameter is omitted:
The MLD snooping functionality cannot be used.
2.
Range of values:
None
dhcp-snooping
The DHCP snooping functionality is used.
1.
Default value when this parameter is omitted:
The DHCP snooping functionality cannot be used.
2.
Range of values:
None
extended-authentication
The extended authentication functionality is used.
1.
Default value when this parameter is omitted:
The extended authentication functionality cannot be used.
2.
Range of values:
None
Default behavior
All functionality can be used by default.
Impact on communication
Because the Switch has to be restarted, communication via the Switch stops until the restart
process is complete.
When the change is applied
If you have changed any values, save the configuration and restart the Switch. The new
setting values take effect when the Switch is restarted.
system function
49
Advertisement
Table of Contents
