Table of Contents
Advertisement
duplex
Default behavior
auto
is set.
Impact on communication
If this command is set for the port in use, the port goes down and communication stops
temporarily. Thereafter, the port restarts.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
If
auto
performed.
2.
For 1000BASE-X, if you do not want to use auto-negotiation, set
full
result of the auto-negotiation.
3.
If
media-type
4.
If
media-type auto
5.
When settings are fixed, MDI-X is always selected.
6.
For 100BASE-FX, set
Related commands
speed
media-type
78
or a parameter containing
for
. If
or
duplex
auto
auto 1000
is changed, the command settings return to the default state.
is set, this command cannot be set.
full
auto
is set for
speed
is set for speed,
for
duplex
.
or
duplex
, auto-negotiation is
1000
for
speed
is set for
full
duplex
and
as a
Advertisement
Table of Contents
