Table of Contents
Advertisement
rmon event
Sets the control information for an RMON (RFC 1757) event group. A maximum of 16
entries can be configured.
Input format
To set or change information:
rmon event
string>
To delete information:
no rmon event
Input mode
(config)
Parameters
<Event#>
Sets the control information for an RMON event group. This parameter is equivalent
to
eventIndex
1.
2.
log
This parameter sets the method for generating an alarm (event) and generates an
alarm log. This parameter is equivalent to
1.
2.
trap
<Community>
This parameter sets the method for generating alarms and sends SNMP traps to the
community specified for <Community>. This parameter is equivalent to
eventCommunity
1.
2.
description
Uses a character string to set the description of an event. Use this parameter as a
note regarding the event. This parameter is equivalent to
in RFC 1757.
<Event#>
[log] [trap
] [owner
<Owner string>
<Event#>
defined in RFC 1757.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 65535
Default value when this parameter is omitted:
An alarm log is not generated.
Range of values:
None
defined in RFC 1757.
Default value when this parameter is omitted:
No traps are issued.
Range of values:
The traps and the community name are set.
Specify a character string that is no more than 60 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
<Description string>
<Community>
] [description
]
eventType
defined in RFC 1757.
rmon event
<Description
eventDescription
defined
625
Advertisement
Table of Contents
