Table of Contents
Advertisement
Parameter type
add/remove specification
Range of
<IF#>
Specify the
to zero
The following tables list the range of
Table 1-3 Range of
Model
Item
No.
1
AX1250S-24T2C
Description
Add information to or delete information from
the information when multiple interfaces have
been specified.
add
The
specification adds information to the
current information.
remove
The
specification deletes information
from the current information.
add
remove
When the
and
show
used, if the
command displays
duplicated information, delete the duplicated
information to optimize the information.
The following shows an optimization example
of information when multiple interfaces are
specified:
Information before entering a command:
switchport trunk allowed vlan 100,101
Input command:
switchport trunk allowed vlan add 103
Information after entering a command:
switchport trunk allowed vlan 100,101,103
and
<IF# list>
values
<IF#>
parameter in
<NIF no.>
<IF#>
and
<IF# list>
Input example
switchport trunk allowed
vlan add 100,200-210
switchport trunk allowed
vlan remove 100,200-210
switchport isolation
interface add
specifications are
fastethernet 0/1-3
switchport isolation
interface add
gigabitethernet 0/25-26
switchport isolation
interface remove
fastethernet 0/1-3
switchport isolation
interface remove
gigabitethernet 0/25-26
<Port no>
format.
/
<IF#>
values.
values for the AX1250S
Ethernet type
fastethernet
gigabitethernet
Specifiable values for parameters
<NIF No.>
of a Switch is fixed
Range of values
0/1 to 0/24
0/25 to 0/26
5
Advertisement
Table of Contents
