Switchport Protocol - Alaxala AX1250S Software Manual

switchport protocol

switchport protocol
Sets the protocol port information.
Input format
To set information:
switchport protocol vlan
switchport protocol native vlan
To change information:
switchport protocol {vlan
remove
To delete information:
no switchport protocol vlan
no switchport protocol native vlan
Input mode
(config-if)
Parameters
vlan <VLAN ID list>
Sets the effective protocol VLANs on the port. When this parameter is changed, the
effective protocol VLAN list is replaced by the list set for the parameter.
1.
2.
native vlan
Sets a VLAN that sends and receives frames of a protocol that does not match the
configuration. Specifiable VLANs are port VLANs.
1.
2.
vlan add
Adds an effective protocol VLAN on the port to the VLAN list.
1.
2.
136
<VLAN ID list> | native vlan
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
<VLAN ID>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See Specifiable values for parameters.
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
<VLAN ID list>
<VLAN ID>
<VLAN ID list> | vlan add
<VLAN ID>}
<VLAN ID list> and the specifiable values, see
<VLAN ID list> and the specifiable values, see
<VLAN ID list> | vlan