Default behavior
short
is set for path cost mode.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When
mst
operates using a 32-bit value. To set 65536 or a larger value as the path cost value for
the
spanning-tree cost
If you use the
not need to set this command.
Related commands
spanning-tree cost
spanning-tree vlan pathcost method
spanning-tree vlan cost
spanning-tree single pathcost method
spanning-tree single cost
is set for the
spanning-tree mode
command, you must set
spanning-tree mst cost
spanning-tree pathcost method
command, the multiple spanning tree
long
for this command.
command to set a path cost value, you do
177