Table of Contents
Advertisement
vlan-group
vlan-group
Sets the VLAN group that will be used for the Ring Protocol and the mapping IDs of the
VLANs participating in the VLAN groups.
A maximum of two VLAN groups can be set for the ring.
Input format
To set or change information:
vlan-group
To delete information:
no vlan-group
Input mode
(config-axrp)
Parameters
<Group ID>
Sets the ID of the VLAN group that will be used for the Ring Protocol.
1.
2.
vlan-mapping
Sets the mapping IDs of the VLANs participating in the VLAN group. One VLAN ID
can be set. Using a hyphen (
time.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
226
<Group ID>
vlan-mapping
<Group ID>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 2
<Mapping ID list>
-
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 128
<Mapping ID list>
) or a comma (
,
) selects multiple VLAN IDs at the same
Advertisement
Table of Contents
